Search for: All records

ABSTRACT Interest in active metamaterial (MM) devices has recently increased due to their potential for tunable, switchable, and scalable optical responses. More specifically, a dynamic, on-chip MM polarizer has applications ranging from material characterization to sensing without the need for cumbersome external filters. This work demonstrates efforts to optimize MM devices for dynamic polarization filtering by combining elements from split-ring resonators, wire-pairs, and fishnet patterns. The polarization grid has been designed to operate under an applied voltage with simulated on/off ratios of 75% and dynamic polarization selectivity of 70%. Samples have been fabricated using epitaxial GaAs on sapphire with various n-type doping concentrations to approximate electrical tuning. 

Abstract— A promising technology for waste-heat recovery applications is thermophotovoltaics (TPVs), which use photovoltaic diodes to convert thermal energy into electricity. The most commonly used TPV diode material is gallium antimonide (GaSb). Recently, GaSb TPV diodes were fabricated with front-surface metallic photonic crystal (MPhC) filters to more optimally convert the incident spectrum. This method showed promising initial results, in part due to a shifting of the photogenerated carriers away from the front-surface and into the device. In this paper, we use the Atlas-Silvaco software package to optimize the TPV diode structure for MPhCs. We investigate the addition of an intrinsic region in the device to take advantage of the shifted photogeneration profile from the MPhCs. This design allows for a 10% improvement in internal quantum at the peak MPhC transmission wavelength. https://doi.org/10.1109/MWSCAS.2017.8053055 

Thermophotovoltaics (TPVs) are a potential technology for waste-heat recovery applications and utilize IR sensitive photovoltaic diodes to convert long wavelength photons (>800nm) into electrical energy. The most common conversion regions utilize Gallium Antimonide (GaSb) as the standard semiconductor system for TPV diodes due to its high internal quantum efficiencies (close to 90%) for infrared radiation (~1700nm). However, parasitic losses prevent high conversion efficiencies from being achieved in the final device. One possible avenue to improve the conversion efficiency of these devices is to incorporate metallic photonic crystals (MPhCs) onto the front surface of the diode. In this work, we study the effect of MPhCs on GaSb TPV diodes. Simulations are presented which characterize a specific MPhC design for use with GaSb. E-field intensity vs. wavelength and depth are investigated as well as the effect of the thickness of the PhC on the interaction time between the e-field and semiconductor. It is shown that the thickness of MPhC has little effect on width of the enhancement band, and the depth the ideal p-i-n junction is between 0.6􀈝m and 2.1um. Additionally, simulated results demonstrate an increase of E-field/semiconductor interaction time of approximately 40% and 46% for a MPhC thickness of 350nm and 450nm respectively.